Rubber joints|Transmission Joints|Expansion Joints Compensator|Waterproof Casing|Duckbill Valve|Filter|Damper|Sealing Device-Gong Yi chang Wang drainage Material Factory

Details

JXH Small rod horizontal bellows

Author Admin Browse Posted 2011-07-25

Name: JXH Small rod horizontal bellows
factory production of small rod transverse bellows is a successful experience of similar products at home and abroad, a painstaking process developed advanced, easy to install the plumbing. Among medium and large caliber small horizontal bellows rod is one of the company's leading products, especially in the design and production of large diameter corrugated compensator small horizontal bar, the leader in home and abroad have been in absolute level.

Features:
small rod horizontal bellows by the two bellows, and with limited nuts over the middle of a small rod and other parts, piping it to absorb any lateral displacement of the plane, while absorbing the axial displacement. Can not afford a small rod internal pressure thrust.
Installation Note:
1, if the user used to use a small lever, please specify when ordering.
2, if users need to use a small rod, after installation, be sure to loosen the nut and plate from the days of ear (or support plate) a distance (from the value determined by the amount of the compensation).
3, if the actual compensation is greater than the value specified on the sample (life ≤ 1000 times), the product must be removed after installation of small rod.

Design temperature: -20 ° C-400 ° C Product Code: JXH Model label: JXH bellows forms: pressure - diameter - the amount of compensation
a small rod transverse bellows technical parameters

Nominal diameter DN	Pressure 0.6Mpa		Pressure 1.0Mpa		Pressure 1.6Mpa		Effective area A cm2	Weld end tube d × t mm	Length L mm	Weight kg F / H
Nominal diameter DN	Axial displacement / axial rigidity mm / (N / mm)	Lateral displacement / horizontal rigidity mm / (N / mm)	Axial displacement / axial rigidity mm / (N / mm)	Lateral displacement / horizontal rigidity mm / (N / mm)	Axial displacement / axial rigidity mm / (N / mm)	Lateral displacement / horizontal rigidity mm / (N / mm)	Effective area A cm2	Weld end tube d × t mm	Length L mm	Weight kg F / H
100	32/210	96/8.0	28/252	86/9.6	26/302	78/12	154	0.8 × 4	1000	30
		200/2.0		180/2.5		162/3.1			1500	36
		306/0.89		275/1.1		248/1.3			2000	41
		411/0.50		370/0.6		333/0.75			2500	47
125	33/170	83/18	31/204	78/21.6	29/245	75/25.9	180	33 × 4	1000	39
		115/6.8		109/8.2		103/9.8			1500	43
		198/3.5		188/4.2		178/5.0			2000	51
		269/1.8		255/2.2		242/2.6			2500	62
150	32/290	65/21	30/348	61/25.2	27/417	58/30.2	299	59 × 4.5	1000	42
		136/5.4		129/6.5		122/7.8			1500	53
		107/2.4		197/2.9		186/3.5			2000	63
		279/1.4		265/1.68		251/2.1			2500	74
200	48/326	72/47	43/391	68/56.4	40/469	65/70.5	531	19 × 6	1000	72
		160/11		152/13.2		144/16.5			1500	89
		250/5.0		237/6.0		225/7.5			2000	106
		341/2.8		324/3.4		291/4.1			2500	123
250	46/400	127/20	43/480	114/25	38/576	108/30	774	73 × 8	1500	121
		199/9.0		179/10.8		170/13.5			2000	150
		271/5.0		257/6.0		231/7.5			2500	178
		343/3.2		325/3.8		293/4.6			3000	206
300	59/336	134/25	56/403	127/30	50/483	121/36	1069	25 × 8	1500	146
		213/11		202/13.2		192/15.8			2000	179
		292/6.0		277/7.2		263/8.6			2500	213
		372/3.8		353/4.6		335/5.4			3000	246
350	58/366	107/40	55/402	102/44	52/442	96/48	1263	77 × 8	1500	171
		178/16		169/18		161/22			2000	208
		250/8.5		237/10		226/12			2500	245
		322/5.3		306/6.9		290/9.6			3000	282
400	57/415	92/58	54/48	87/63	51/492	83/69	1612	26 × 8	1500	192
		154/23		142/25		135/27			2000	235
		215/12		204/13		196/15			2500	278
		278/7.7		264 / 9		250/11			3000	321
450	55/415	81/80	52/456	77/88	49/484	73/96	1995	78 × 8	1500	218
		135/32		128/35		122/38			2000	268
		189/17		180/19		171/21			2500	319
		243/11		230/12		218/13			3000	370
500	90/746	36/241	72/895	32/260	58/984	29/281	2625	29 × 10	1400	535
		68/89		62/96		56/104			1700	581
		102/42		92/45		83/49			2000	627
		126/28		113/30		102/32			2200	658
		166/18		149/19		134/21			2500	704
		198/12		178/13		160/14			2800	750
600	94/820	42/208	85/886	38/224	75/948	34/242	3590	30 × 10	1500	648
		71/102		64/110		58/118			1800	702
		106/47		95/51		86/55			2200	775
		135/30		121/32		111/35			2500	830
		168/21		156/23		141/25			2800	884
		199/14		183/15		168/17			3200	957

上一篇：【DC medium without thrust compensator】
下一篇：【ZMS-type Buried corrugated compensator】

Products

Gong Yi chang Wang drainage Material Factory
Address: Gongyi City, the southern section of Wing
Tel :0371 -64393352 64580820
Fax :0371 -64031200
Mobile: 15903663076
Zip: 451200
E-mail: gychangwang@sina.com
Website: www.gychangwang.com